Marani Power Soft MDA4-750PS Power Amplifier

Save 16%

Price:
Sale price$2,188.99 Regular price$2,600.00

Description

MDA4-750PS is a highly flexible, powerful and intelligent 4-Channel power amplifier delivering up to a total of 4x750W @ 4 ohms and 4x870W @ 2 ohms , or able to drive 70V/100v Constant Voltage Lines. The 4 output channels can be bridged into 2, and provide 1500W@8ohms power output. Designed to meet the most demanding portable and fixed installation sound systems, it provides a full set of value added features such as high output power, efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software.

MDA4-750PS includes a highly efficient Switch Mode Power Supply, which provides power to the output stages. The 4 output stages use the well-proven Class D module-full bandwith PWM modulator obtaining ultra low distortion, high efficiency and also equipped with a full set of circuit protections. Furthermore the Clip/Limiter function provides output monitoring to prevent speaker damage with gentle gain reduction at clip threshold, in addition to the efficient heat dissipation system and Over-Heat protection which themselves ensure uncompromised reliability.

MDA4-750PS is more than just an amplifier. It is also a capable and sophisticated loudspeaker processor, thanks to its powerful MARANI® DSP running 96 kHz / 24 bit [ 96 bits precision for the internal intermediate processes] and high performance 24bit AD/DA Converters. It offers 4 channels of slope up to 48dB/Oct IIR HP/LP crossover filters, or up to 512 taps FIR filters[FIR coefficients can be imported as .txt/.csv  file from external application] , RMS compressor, parametric Eqs , alignment delay and white/pink noise internal generator, everything needed to optimize a loudspeaker system.

Moreover, MDA4-750PS allows a 12dB headroom on processes overflow. User can also set the parameters, select input source, load presets, etc with the extraordinary touchscreen LCD in front panel. Apart from regular analog and digital source input, DANTE™ is also optional.

Outstanding Performance High power output: 4x870W @ 2 ohm; 4 x 750W @ 4ohm, 4x350W@8ohm;
BTL power output: 2x1500W@8ohm(BTL),  or 70V/100V Direct Drive
Highly efficient Switch-Mode Power Supply
Class D Amp module-full bandwidth PWM modulator with ultra low distortion
Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature
Support DANTE™ audio (optional)
Excellent sonic performance with 24bit high end converters running 96kHz sample rate
Top-grade DSP Engine 12 band parametric equalization per input channel
4 band parametric equalization per output channel
Each band can be switched to Bell, Low/High Shelving variable Q
Warm Backup is available, by setting source priority  and activating "Auto switch" function in PC Sw
FIR or IIR Filters for X-Over:
The X-Over can be implemented both by FIR filters or IIR HP/LP, sortable in the dedicated PC software
FIR: Crossover filter can be created by the user selecting from 256 up to 512 taps, the FIR type and the Out Band attenuation
        FIR Coefficients can be imported as .txt file from external applications
IIR: Crossover filter with slopes from 6 ~ 48 dB/Octave, including Butterworth, Bessel, Linkwitz-Riley and customized configurayios.
Each output channel is equipped with a precious Peak Limiter with sortabie ratio, attack/release time 
Adjustable Delay time up to 500.998ms for input channel, and 340.998ms for output channel
Each input channel includes a Pink/White noise internal generator, noise gate function, RMS compressor with variable knee, and powerful 12-band PEQ
Direct PC/Network Connection & Control Front panel USB connector for direct PC communications
Ethernet interface for system setup, monitoring and control via manageable remote PC software
Front panel interactive touchscreen LCD display for parametric setting, input source selection, preset loading (up to 50 Presets are available) and so on
Simultaneous control up to 32 units via PC software
50 Preset Selection

 

Power & Amplifier section

Number of Channels
Output Power Max Output: 4x870W @ 2Ω,4x750W @ 4Ω,4x350W@8Ω,
BLT:2x1500W@8Ω or 70V Direct Drive
Output Circuitry Class D Amp Module- full bandwith PWM modulator with ultra low distortion
THD + N 1% @ maximum output power
SNR(Signal to Noise Ratio) >108 dB (A-weighted, AES-17 filter)
Frequency Response 20 Hz-20 kHz ± 0.5 dB 
Power Supply independent Switch mode Power Supply
Operating Range 90 - 245 VAC (50/60Hz)
Protections Thermal, Short-circuit/Overload, Clip Limiter, Permanent Signal Limiter, High Frequency
Maximum Input Level +13dBu
Maximum Output Level +6dBu
Analog Input 4 x XLR electronically balanced

DSP & Processing

DSP Engine 1 x MARANI® M716 DSP
DSP Resolution 24 bit (data) x 24 bit (coeff.), 54 bit accumulation registers
96 bit precision on intermediate processing data 
Parametric Equalization 12 band parametric equatlization per input 
4 band parametric equalization per output
FIR for Phase Correction Asymmetrical 512 Taps, with coefficients generated by Pc Sw embedded Wizard tool, allowing also FIR latency Adjustment/reduction.
Coefficients can also be imported by external third party applications, so as can be exported to third parties applications
Filter Type Bell, Shelving, HP/LP, Band Pass, Notch Filter, All Pass
Filter Gain From -15dBu up to +15dBu by 0.5dBu resolution steps
Center Frequency Sortable with a 0.5dBu resolution step from 20Hz up to 20kHz 
Filter Q/BW Bell: Q from 0.4 up to 128, steps: 100
Shelving: Q from 0.1 up to 5.1, steps: 100
Bandpass/Notch: Q from 4 up to 104, steps: 100
Input&Output Gain -12dB ~ +12dB, resolution: 0.1dBu
IIR Crossover section HPF/LPF Butterworth 6/12/18/24/36/48dB per octave; Bessel 12/24dB per octave;
Linkwitz-Riley 12/24/36/48dB per octave.
FIR Crossover section HPF/LPF Hp/Lp/Bp filters, Taps from 256 up to 512, Attenuation up to -120dB, Window type as Rect / Sinc /
Keiser / Hanning / Hamming / Blackman / Nuttal / Sine
Noise Generator Type: White/Pink Noise; Level: -40dBu ~ 0dBu
Input RMS Compressor Threshold from -16dBu up to +14dBu; Ratio: 2:1~32:1; Knee: 0~100%;
Attack time from 5ms up to 200ms; Release time from 0.1sec up to 3sec
Output Peak Limiter Threshold from -16dBu up to +14dBu;
Attack time from 1ms up to 900ms; Release time from 0.1sec up to 5sec
Head room on Internal Overflow
Process
12dB
Delay Each input has up to 500.998ms delay, each output has up to 340.998ms delay
Routing Full matrix mixing mode
Ground Noise -86 dBu

General

Device Presets 50
Front Panel LCD display with Touchscreen Function
1 x Red LED (Power)
1 x Rotary encoder push button switches
USB type B connector
Rear Panel 6 x XLR female connector (Input)
4 x Neutrik® Speakon NL4 (Output)
2 x Ethernet 10/100 TCP-IP (Dante™ Audio Signal: optional)
1 x Ethernet 10/100 TCP-IP (ETHERNET PC Control)
1 x Locking PowerCON® 20A: AC Power Cord (Blue)
1 x 80*80 mm 24V FAN
Dimensions 482X320X88mm 2RU
Package size 550x550x160 mm
Weight, Net / Shipping 7.20 Kg / 10.00 Kg

Payment & Security

PayPal Venmo

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed